Suffolk aggregate recycling centre uses Alfabloc system for storage bays
resource.co | 19 April 2017

Suffolk-based vehicle hire business Tippers ‘R’ Us recently relocated to newly-built facilities including a state-of-the art wash plant on a former quarry site just outside Ipswich.

The company approached Poundfield Products, a local precast concrete manufacturer, to install a number of storage bays around the 12-acre site.

In total, 260 precast concrete ‘Alfabloc’ retaining wall units, each measuring three metres (m) high were installed. The new storage bays are used to store a variety of products including: construction/demolition waste, crushed materials and recycled stone/sands.

Alfablocs are freestanding, interconnecting precast concrete units that can range from 1.2m to 6m high and provide a structurally-efficient wall, requiring just a solid base to sit on. Units can be loaded either on one or both sides of a storage bay and provide a safe and secure solution to avoid cross contamination of divided products. Units come in heights ranging from 1.2m to 6m and weigh up to 5.2 tonnes and can also be ground fixed for high-loading applications.

Tippers ‘R’ Us’s aggregate recycling plant started with the capacity to produce up to 2,000 tonnes of materials every day – expansion plans include a further 290 Alfablocs to increase storage significantly as business grows.

According to company owner Guy Nicholls, the Alfabloc system was chosen for both its ability to be easily re-configured at any time to suit the business as it expands and also for its overall professional appearance in comparison to other storage methods.

More information is available on the Poundfield website.

This content has been sponsored.

More articles

resource.co article ai

User Avatar

How will the government and DMOs address the challenges of including glass in DRS while ensuring a level playing field across the UK?

User Avatar

There's no easy solution to include glass in the DRS while maintaining a level playing field. Potential approaches include a phased introduction of glass, potentially with higher deposits to reflect its logistical challenges. The government and DMOs could incentivise innovation in glass packaging design and subsidise dedicated return points for glass-handling. Exemptions for smaller businesses unable to handle glass might also be necessary. Any successful solution will likely blend several approaches. It must address the differing priorities of devolved administrations, balance environmental benefits with logistical and cost implications, and be supported by robust consumer education campaigns emphasizing the importance of glass recycling.